Date

May 24 (Wed), May 25 (Thu), May 26 (Fri), 2023

Venue

Makuhari Messe

Tonsen Machinery

Basic information

Indoor booth number: I-30

Exhibited products and services

Aerial Work Platform AB14EJ

A battery-powered bending boom lift with a floor height of 14m. With a compact body with a total width of 1730mm and a tail swing of 50mm, it is useful for work in narrow spaces and indoors. In addition, the maximum workable inclination is 5°, and if the inclination is slight, the machine can work safely without stopping. In terms of operability, the proportional control of the joystick enables smooth start and stop of the three operations of travel, boom extension and rotation, and pinpoint access to the work site. Error codes and error details are displayed on the monitor, making it easy to check machine status, diagnose failures, and set parameters.

aerial work platform 1012E

SINOBOOM's scissor lift incorporates fine ingenuity in pursuit of safety and convenience from the design stage. In addition to the slide deck and handrail folding function, forklift outlets are installed on both the left, right and rear sides to improve the convenience of transportation. In addition, we have made it possible to safely get on and off by designing the frame of the entrance to open completely. In addition, the lower running body is equipped with a resin bumper, making it difficult to scratch the body. In addition, regarding the procurement of spare parts, which is considered a weak point of overseas products, we have achieved domestic procurement by promoting the generalization of parts.

Aerial work platform TB18J

It is an engine type direct boom lift with a floor height of 18m. It has a high climbing ability with a gradient of 24° and is active off-road with its own patented technology that controls tire slip. With a simple design, the work width is controlled by a limit switch to achieve safe work. In addition, the proportional control of the joystick enables smooth start and stop of the three operations of travel, boom extension, and body rotation, allowing pinpoint access to the work area. Error codes and error details are displayed on the large screen display, making it easy to check machine status, diagnose failures, and set parameters.