English 
日本語 Product and Technology PR Seminar by Exhibitors
Product and Technology PR seminar by Exhibitors
Registration required on the day / free of charge
*Please come to the seminar venue before the start time.
* Recording, photography, video recording, etc. of the session is strictly prohibited.
*Depending on circumstances, the lecturer and program content may change, and textbooks may not be distributed.
*Instructor titles and affiliations may be omitted due to space limitations.
※Titles omitted
About the CPD/CPDS Study Program
CSPI-EXPO is(public corporation)The study program has been approved by the Japan Society of Civil Engineers CPD, the Construction Consultants Association CPD, and the Japan Federation of Civil Engineering Construction Management Engineers Association CPDS.
A certificate of attendance for one unit will be issued to participants of the target seminar.
Please check the following for the seminars eligible for each system.
(Public corporation) Japan Society of Civil Engineers CPD credits granted
- [Special seminar A/B/C venue] All seminars
- [PR seminar II venue] May 24 (Wed) 11:00-12:00 CSPI-E501seminar of
(General incorporated association) Construction Consultants Association CPD credits eligible
- [Special seminar A/B/C venue] All seminars
- [PR seminar II venue] May 24 (Wed) 11:00-12:00 CSPI-E501seminar of
(no company) National Federation of Civil Engineering Construction Management Engineers Association CPDS credits eligible
- [Special seminar A venue]CSPI-A101 to A109, A111 (A110 not applicable)
- [Special seminar B/C venue] All seminars
- [PR seminar II venue] May 24 (Wed) 11:00-12:00 CSPI-E501seminar of
Product/Technology PR Seminar by Exhibitors Ⅰ
|
12:00
Kensetsu System
Technical Solution Department Manager
Kei Takagi
|
13:50
NIKON-TRIMBLE CO.,LTD
Geospatial Division Marketing Department Marketing Section
Hiroyuki Kimura
|
15:10
Digitalization of daily construction reports and cost management leading to the future
Site data utilization proposals for management in the construction industry
Kensetsu System
General Manager of 1st Development Department
Heihachi Sakakibara
|
16:30
Streamline all construction operations digitally
Introducing the introduction results from Shimizu Corporation! Super easy 3D bar arrangement inspection tool "Modely"
DataLabs Inc.
SaaS Sales Headquarters Manager
Miho Kawakita
Introducing "Modely", a tool that saves labor in bar arrangement inspection using 3D data acquired with iPhone/iPad Pro.
Mr. Masakazu Yanagawa, Manager of the DX Promotion Group, Innovation Promotion Department, Civil Engineering Headquarters, Shimizu Corporation, who is already using it at the site, will talk about the decisive factors and achievements of the introduction. In addition, we will explain the features and effects of Modely while showing the data measured at the actual site.
|
12:00
Connect and spread remote presence
Toward the realization of remote workmanship inspection
Kensetsu System
Deputy Manager, Technical Solution Department
Yousuke Tanaka
|
13:50
"Forefront of XR (cross reality) utilization in the field!"
～Introducing cutting-edge XR solutions that are appearing one after another～
SITECH
Support Center Senior Engineer Surveyor
Toru Kameda
NIKON-TRIMBLE CO.,LTD
Building Solution Promotion Department
Yoshiki Yasuda
XR (Cross Reality) is a fusion of the real world and the virtual world using the latest technologies such as VR (virtual reality), AR (augmented reality), MR (mixed reality), SR (alternative reality), cloud, and 3D. Trimble offers XR solutions such as Trimble SiteVision, Trimble EarthWorks AR, Trimble XR10, Trimble Connect MR, and Trimble Connect AR that can be used in various fields. During this time, we will explain the overview, features, and usage of these.
|
15:10
Finally appeared from KENTEM! New information sharing system "RevSIGN"
ASP issues in local government construction
Kensetsu System
Deputy Manager, Technical Solution Department
Yousuke Tanaka
|
16:30
Streamline all construction operations digitally
Promotion of BIM/CIM standardization by fully automatic modeling of structures and sharing/visualization of 3D data
DataLabs Inc.
CEO
Daisuke Tajiri
In response to the increase in maintenance and repair work and the implementation of BIM/CIM principles, we will provide a fully automatic modeling function for structures.
With a level of simplicity that allows you to create a current state model just by waiting, we will contribute to improving the productivity of construction companies nationwide.
In addition, LinkedViewer (NETIS registered) will support the visualization and sharing of 3D models and point cloud data, which will become important in the future.
In addition, we will also introduce our efforts with JR East and our future plans.
|
12:00
Generalization of BIM/CIM finally started
KENTEM Construction BIM/CIM Solution Thorough Explanation
Kensetsu System
Technical Solution Department Specialist
Atsushi Suzuki
From FY2023, the Ministry of Land, Infrastructure, Transport and Tourism will apply BIM/CIM in principle to all public works except for small scale projects. BIM/CIM is not intended to create 3D models. The purpose is to improve the efficiency and productivity of construction by utilizing 3D models. In this seminar, we will explain the latest information on BIM/CIM and how to utilize BIM/CIM models in the construction stage using KENTEM_BIM/CIM solutions using specific examples.
|
13:50
"Improve productivity of ICT construction! IBSS on-site front line!"
~Introduction of total utilization cases from acquisition of correction information to construction history~
SITECH
Support Center Manager
Hirotake Ishiwatari
By introducing IBSS, Trimble WorksManager, and Trimble WorksOS, it is possible to provide total support, from acquisition of correction information at the site to construction history management, making it possible to proceed with ICT construction more rationally and productively.
Based on case studies of customers who have already used this system, we will introduce its usability, advantages and disadvantages.
|
15:10
