Date

May 24 (Wed), 25 (Thu), 26 (Fri), 2023

Venue

Product and Technology PR Seminar by Exhibitors

Product and Technology PR seminar by Exhibitors

Registration required on the day / free of charge
*Please come to the seminar venue before the start time.
* Recording, photography, video recording, etc. of the session is strictly prohibited.
*Depending on circumstances, the lecturer and program content may change, and textbooks may not be distributed.
*Instructor titles and affiliations may be omitted due to space limitations.
※Titles omitted
About the CPD/CPDS Study Program

CSPI-EXPO is(public corporation)The study program has been approved by the Japan Society of Civil Engineers CPD, the Construction Consultants Association CPD, and the Japan Federation of Civil Engineering Construction Management Engineers Association CPDS.

A certificate of attendance for one unit will be issued to participants of the target seminar.
Please check the following for the seminars eligible for each system.

(Public corporation) Japan Society of Civil Engineers CPD credits granted

  • [Special seminar A/B/C venue] All seminars
  • [PR seminar II venue] May 24 (Wed) 11:00-12:00 CSPI-E501seminar of

(General incorporated association) Construction Consultants Association CPD credits eligible

  • [Special seminar A/B/C venue] All seminars
  • [PR seminar II venue] May 24 (Wed) 11:00-12:00 CSPI-E501seminar of

(no company) National Federation of Civil Engineering Construction Management Engineers Association CPDS credits eligible

  • [Special seminar A venue]CSPI-A101 to A109, A111 (A110 not applicable)
  • [Special seminar B/C venue] All seminars
  • [PR seminar II venue] May 24 (Wed) 11:00-12:00 CSPI-E501seminar of

Product and Technology PR Seminar by Exhibitors

Product/Technology PR Seminar by Exhibitors III

11:00-12:00
III Venue
CPDS
11:00
|
12:00

Improving productivity by fully automating marking work

Next-generation marking robot "SUMIDAS"

NIKKEN CORPORATION

General Manager, Technology Development Department, Sales Headquarters

Jiro Ken (real name: Kengo Okimoto)

12:50-13:50
III Venue
CPDS
12:50
|
13:50

(Tentative) 3D introduction seminar in the surveying and design industry

(Tentative) We will introduce the tips and know-how of introducing 3D with actual examples.

FUKUICOMPUTER,Inc.

14:10-15:10
III Venue
CPDS
14:10
|
15:10

An Introduction to Building Construction DX Proposed by Topcon

Topcon Corporation

15:30-16:30
III Venue
CPDS
15:30
|
16:30

Ground restoration technology BFS method

Natural earth and sand backfill method

Tokyo Contec

representative

Kouki Nakao

11:00-12:00
III Venue
CPDS
11:00
|
12:00

Realization of construction DX by utilizing 3D data

Technologies to be used in the future and their applications

APEX.CO

main office

Yusuke Shimoto

Technologies and applications to be used in the future
In recent years, the introduction of DX (digital transformation) is progressing rapidly in the construction industry. Realization of DX by utilizing 3D data is attracting attention.
We will introduce a new business model that utilizes 3D data on the merits of construction DX using 3D data.
・Design optimization / construction efficiency and quality improvement / facility management improvement / creation of new value by combining AI technology

12:50-13:50
III Venue
CPDS
12:50
|
13:50

(Tentative) BIM/CIM introduction seminar in the construction industry

(Tentative) Introducing the tips and know-how of introducing BIM/CIM with actual examples

FUKUICOMPUTER,Inc.

14:10-15:10
III Venue
CPDS
14:10
|
15:10

New 3D workflow proposed by Topcon

TOPCON SOKKIA POSITIONING JAPAN CO.,LTD.

15:30-16:30
III Venue
CPDS
15:30
|
16:30

Contribute to the promotion of DX by renting AI bar arrangement inspection terminals, IoT devices, etc.!

We provide rental support to solve problems such as labor shortages and productivity improvement at construction sites.

NISHIO RENT ALL Co.,Ltd.

General Manager, Communication Instrument East Japan Sales Department

Akinori Sakashita

~ Approximately 60% reduction in total work!
AI rebar arrangement inspection terminal that contributes to labor saving and manpower saving in rebar workmanship measurement Until now, confirmation of rebar arrangement workmanship was done by directly measuring and confirming by multiple people at the site, but 2023 In fiscal 2019, the Ministry of Land, Infrastructure, Transport and Tourism is expected to implement social implementation of reinforcing steel workmanship measurement using digital data. In order to contribute to the realization of highly accurate and reliable bar arrangement inspections in the construction industry, Nishio Rent All Co., Ltd. rents AI bar arrangement inspection terminals equipped with stereo cameras and boasting a measurement accuracy of ±5 mm for reinforcing bar spacing. In this seminar, we will introduce in detail the inspection method and report creation examples using this terminal.
~ Rental IoT equipment and services that accelerate DX ~ In addition to AI bar arrangement inspection terminals, we will also introduce solutions that contribute to work style reforms through rental, such as utilizing cloud-based measurement equipment and Wi-Fi environment maintenance. To do.

11:00-12:00
III Venue
CPDS
11:00
|
12:00

Latest information on smartphone high-precision lidar survey app Geo Scan

-The reality that smartphone surveying has caught up with terrestrial laser surveying-

OPTiM Corporation

general manager

Yasuaki Sakata

・Already installed by nearly 4-digit users nationwide! What is Geo Scan using iPhone with LiDAR that dramatically increases productivity?
From major general contractors to small and medium-sized construction companies, one out of 20 construction consultants have already introduced Geo Scan.

・It's been two years since the smartphone surveying app Geo Scan was released, and it's already going beyond drone surveying to have the same performance as terrestrial laser surveying. I will let you know the actual situation.

・It makes the job site so much easier! We will introduce the flow of surveying, inspection, and drawing creation with a smartphone, and introduce examples of construction companies and construction consultants using Geo Scan to reform their operations.

12:50-13:50
III Venue
CPDS
12:50
|
13:50

Construction DX using the latest drone technology

DJI JAPAN K.K.

14:10-15:10
III Venue
CPDS
14:10
|
15:10

Next-generation monitoring proposed by Topcon

TOPCON POSITIONING ASIA CO., LTD.

Chief, ICT Construction Solution Department

Takaya Fujii

Product and Technology PR Seminar by Exhibitors

Click here if you want to combine visitor registration and seminar application

Click here if you only want to apply for the seminar (those who have an invitation ticket)